Exploration 31.1: Amplitude, Frequency, and Phase Shift

 

amplitude = V     frequency ( f ) = Hz
phase angle (φ) = * π (radians)      

Please wait for the animation to completely load.

We characterize the voltage (or current) in AC circuits in terms of the amplitude, frequency (period), and phase.  The sinusoidal voltage of this function generator is given by the equation

V (t) = V0 sin(ωt - φ) = V0 sin(2πƒt - φ),

where V0 is the amplitude, ƒ is the frequency (ω = 2πƒ is the angular frequency), and φ is the phase angle (voltage is given in volts and time is given in seconds).  Restart.

To begin with, keep the resistance of the variable resistor equal to zero.  Pick values for the voltage amplitude (between 0 and 20 V), frequency (between 100 and 2000 Hz), and phase angle (between -2π and 2π). 

  1. What does the amplitude on the graph correspond to? 

  2. If you increase the amplitude, what do you expect to happen?  Try it.

  3. Measure the time between two peaks (or valleys) on the graph.  This is the period (T).  What does 1/T equal? 
  4. What do you need to change to increase the time between two peaks?  Try it.
  5. Compare the plots when φ = 0 and  when φ = 0.5*π.  (You can right-click inside the plot to make a copy.)
  6. What happens when φ = π? 
  7. Pick a value of φ other than 0.  Measure the time, t (measured from t = 0), it takes for the graph to cross the horizontal axis with a positive slope (going up).  φ should be equal to 2πƒt.  So, the phase (or phase shift) tells you how much the graph is shifted from a straight sin2πƒt curve. 
  8. Note that when φ = 0.5*π, the plot is a cosine curve.  Why?

Now, change the variable resistor.  The plot shows both the voltage across the 1000 Ω resistor (blue) and the voltage supply (red).  Kirchhoff's laws hold for any instant of time in an AC circuit. 

  1. Use the techniques you learned for DC circuits to calculate the current in the circuit at several different points. 
  2. Verify that this circuit is simply a voltage divider. 
  3. What value does the variable resistor need to have for the maximum voltage across the 1000-Ω resistor to be 1/3 of the value of the source?

 

 

Exploration authored by Anne J. Cox.
Script authored by Wolfgang Christian.
Instructor's Resource CD Edition: Do not post or distribute.
The complete version of Physlet Physics is available as a text with CD; Physlet Physics can be bundled with this Prentice Hall textbook.
© 2004 by Prentice-Hall, Inc. A Pearson Company